Enquiry:hkmarketing@epc.com.hk 
- LoadTrac III system for incremental consolidation and swell testing fully automates an entire consolidation test.
- Constant load and constant volume swell tests can be run automatically.
- Once a sample is placed into the load frame, the test conditions programmed, and the test started, the LoadTrac III system performs the complete test up to 32 steps without intervention by the user.
- The computer automatically increments to the next stress by using conditions specified by the user.
- Incremental consolidation test can be completed in 24 to 48 hours on most materials.
- The LoadTrac III system utilizes a high speed, precision micro stepper motor to apply the vertical load to the soil specimen.
- An embedded control board with a dedicated CPU takes readings from the force transducer and displacement transducer to control the stepper motor.
- The base unit includes built-in data acquisition and display capability.
- Sensor readings are displayed in SI or English units and stored in memory.
- For incremental consolidation, the base unit is linked to a PC using the network communications module and the appropriate software.
- Optional software running in Windows® 2000, XP, Vista, 7 completely automates the test, reducing the data and preparing test results.
- Other options include running constant rate of consolidation, unconfined compression and triaxial on a 50 mm (2.00 in.) or less diameter sample.
-
Products
-
Civil Engineering Testing Instruments
-
Material Testing Equipment
-
Device Diagnostic Tool
-
Transducer & Data loggerStrain Gauge
- General Use
- Waterproof
- High Temperature Use
- High and low temperature
- Cryogenic temperature use
- Weldable
- Concrete Material Use
- High Endurance
- For Plastic
- Wood, Gypsum Use
- For Magnetic Field
- Post-yield
- bending and tensile
- Stress Gauge
- Temperature
- Crack Detection
- Bolt Strain
- Sensor specific
- Strain Gage Related Products
- Load Cell
- Displacement
- Pressure
- Velocity/ Acceleration
- Stress
- Torque
- Temperature
- Tilt
- Water Content
- Pore Water Pressure
- Inertial Measurement Unit
- Static Strain Gauge Data Logger
- Dynamic Strain Transducer Data Logger
- Static Strainmeter
- Dynamic Strainmeter
- Portable Strainmeter
- Slope Movement Monitoring
- Strain Indicator
- Strain Gauge Calibration
- Frictional Type Torque Sensor
- Slip-ring type Wheel Torque Measurement
- Slip-ring type Wheel Force Transducer
- Vehicle Examination Transducer
-
Education
-
Digital Platform
-
Industrial Testing
-
Environmental Testing
-
- Solution
- Service
- News
- About
400-700-9998
-
Products
-
Civil Engineering Testing Instruments
-
Material Testing Equipment
-
Device Diagnostic Tool
-
Transducer & Data loggerStrain Gauge
- General Use
- Waterproof
- High Temperature Use
- High and low temperature
- Cryogenic temperature use
- Weldable
- Concrete Material Use
- High Endurance
- For Plastic
- Wood, Gypsum Use
- For Magnetic Field
- Post-yield
- bending and tensile
- Stress Gauge
- Temperature
- Crack Detection
- Bolt Strain
- Sensor specific
- Strain Gage Related Products
- Load Cell
- Displacement
- Pressure
- Velocity/ Acceleration
- Stress
- Torque
- Temperature
- Tilt
- Water Content
- Pore Water Pressure
- Inertial Measurement Unit
- Static Strain Gauge Data Logger
- Dynamic Strain Transducer Data Logger
- Static Strainmeter
- Dynamic Strainmeter
- Portable Strainmeter
- Slope Movement Monitoring
- Strain Indicator
- Strain Gauge Calibration
- Frictional Type Torque Sensor
- Slip-ring type Wheel Torque Measurement
- Slip-ring type Wheel Force Transducer
- Vehicle Examination Transducer
-
Education
-
Digital Platform
-
Industrial Testing
-
Environmental Testing
-
- Solution
- Service
- News
- About
- 中文
