Enquiry:hkmarketing@epc.com.hk 
Description
The FT64 is a recirculating process chiller that primarily supplies diluted glycol to rapidly chill products flowing through heat exchangers.
Frequently used as a second/final stage cooling medium, this chiller can also be used to fulfil the whole cooling duty when multiple stages are utilised.
The FT64 can be used for multiple processing systems at once and controlling the flowrate of each circuit.
The cooling media can be deionised water or diluted monopropylene glycol (or similar) to achieve the best cooling performance you desire.
Technical specifications
Cooling capacity
The cooling capacity of a chiller is dependent on its operating conditions, particularly the liquid temperature and concentration.
The FT64 has a typical cooling capacity of 10.8kW with an outlet temperature of 0°C, using a 20% glycol solution (typical FT94X application). For other applications please consult Armfield.
Refrigerant
R407C Freon
Max ambient temp
32°C
Process pump
Head
6 bar max
Flow rate
4.8 m³/hr at 3.7 bar
Ingress protection rating
54
Overall dimensions
Length
0.756m
Width
1.405m
Height
0.806m
Packed and crated shipping specifications
Volume
2.15m3
Gross weight
310Kg
Features / benefits
Rapid cooling of products even at higher flow rates
Very simple control panel with ergonomic operator interface
High accuracy temperature control
Continuous recirculation ensures reduced response times when changing the set point
Three distribution circuits mean one can be isolated leaving the other two running at the desired capacity without interruption
High accuracy in control of temperature due to reservoir of precooled media
Small footprint
Three distribution circuits
Wide process range and ambient operability range
High efficiency cooling circuit
