FB体育app官网

Description

The C1-MkIII equipment comprises a single-stage air compressor, complete with a test section and a throttling valve, plus an electronics
console containing the necessary controls and instrumentation.
The single-stage compressor is driven by an integral three-phase ACmotor. 

The compressor speed can be varied using an advanced torquevector frequency inverter, which gives stable and accurate speed control
plus direct electronic read-out of the torque produced by the motor.
The compressor is ftted with an outlet duct incorporating a throttling valve, which allows the flow to be varied independent from compressor speed.
The equipment is supplied with a convergent-divergent test section, ftted at the compressor inlet, designed to produce Mach-1 velocity at
the throat. The duct is fabricated from clear acrylic, enabling the student to see the construction and the profles. A pressure-sensing ring tapping
is provided at the inlet, at the throat and at the discharge end of the diffuser. This duct allows all the major concepts of compressible flow to
be demonstrated.
The electronics console includes two high-range and two low-range differential pressure sensors plus a control for motor speed and displays
for the compressor speed, the pressures and the motor torque.

Ordering specification

• A benchtop unit designed to demonstrate and teach the fundamentals of compressible flow to engineering students
• Fitted with a single-stage, side-channel blower
  
• Complete with convergent-divergent duct capable of achieving Mach 1 velocity at the throat
• Advanced torque-vector speed control of blower motor with electronic torque measurement
• Four electronic pressure sensors
• Test section made from clear acrylic
• Additional test sections available (x6) complete with benchtop stand
• Compressor test accessory available
• Data logging accessory as standard, complete with educational software and electronic temperature sensors