Enquiry:hkmarketing@epc.com.hk 
Test rig for rotation and castor testing on
seating furniture according to EN 1335, EN 14073-2, DIN 68878, NEN 1812, and
BIFMA X5.1, load controlled. with loading pad. The pneumatic test axis has its
own controller assembled in the immediate vicinity, which is operated from a PC
via CAN-bus and work synchronised. It is supplied by a central supply terminal,
which can carry up to 2 test axes. Central supply terminal, PC, screen, and
keyboard can be positioned on a separate, moveable framework. Via a USB
interface on the PC the data, control commands and software settings are
transmitted via the central supply terminal to the test axes. Part of the test
stand is our extensive testing and evaluation software for the system software Windows
2000, XP or Win7.
The test rig consists of:
• 1 framework with traverse member and base
plate 1200 x 1200mm, 12mm thick , galvanised steel,
• with screwed on stiffening, drill pattern
with thread M10; moveable and vibration-reduced
• 1 electromotive test axis for the
rotation of the turning knob, position-controlled, rotation angle +/- 360°
• 1 pneumatic test axis for seat, load
controlled, piston diameter 80mm, stroke 500mm,
• test load up to 2500N, load cell 5kN.
Load is transmitted vertically to the seat with lateral adjusting range.
• 1 load pad diameter 200mm for seat
according to DIN EN 1335, clamp
• Operating pressure and cylinder limit
switch control
• 1 emergency stop button on each test axis
• clamping device for X-base
