Enquiry:hkmarketing@epc.com.hk 
The European Standards EN 13808 and EN 15322 demand this test according to EN 13588 as a basis for the CE marking of all polymer-modified binders for the intended use of surface treatment.
Vialit Cohesion Pendulum by Cooper CRT-VCP is a testing device to analyse the cohesion of bitumen in road construction.
The cohesion is one of the measures of the performance of a bituminous binder. It is important to use binders which have a sufficient level of cohesion according to the level of traffic to be supported.
Cohesion has originally been developed for surface dressing however it can be used for any type of binder (pure, modified or fluxed) which is to be used in different types of road applications. Knowledge of cohesion enables the choice of binder type for given traffic and site conditions.
Key Features
● Automatic security safety catch avoiding pendulum to crash after test impact
● Incremental distance sensor in combination with a digital display accurate to 0,1°
● 36 cube and cube holder combinations, which allows an economic production of test samples
● Efficient safety system in compliance with EC - machinery directive 98/37/EC which allows comfortable handling with maximum operational reliability
● Module with built-in RS 232-port (allows the metering of test value via computer, retrofittable by user)
Key Uses
Bitumen
Bitumen emulsions
Flux bitumen
Standards
EN 13588
EN 13808
EN 15322
-
Products
-
Civil Engineering Testing Instruments
-
Material Testing Equipment
-
Device Diagnostic Tool
-
Transducer & Data loggerStrain Gauge
- General Use
- Waterproof
- High Temperature Use
- High and low temperature
- Cryogenic temperature use
- Weldable
- Concrete Material Use
- High Endurance
- For Plastic
- Wood, Gypsum Use
- For Magnetic Field
- Post-yield
- bending and tensile
- Stress Gauge
- Temperature
- Crack Detection
- Bolt Strain
- Sensor specific
- Strain Gage Related Products
- Load Cell
- Displacement
- Pressure
- Velocity/ Acceleration
- Stress
- Torque
- Temperature
- Tilt
- Water Content
- Pore Water Pressure
- Inertial Measurement Unit
- Static Strain Gauge Data Logger
- Dynamic Strain Transducer Data Logger
- Static Strainmeter
- Dynamic Strainmeter
- Portable Strainmeter
- Slope Movement Monitoring
- Strain Indicator
- Strain Gauge Calibration
- Frictional Type Torque Sensor
- Slip-ring type Wheel Torque Measurement
- Slip-ring type Wheel Force Transducer
- Vehicle Examination Transducer
-
Education
-
Digital Platform
-
Industrial Testing
-
Environmental Testing
-
- Solution
- Service
- News
- About
400-700-9998
-
Products
-
Civil Engineering Testing Instruments
-
Material Testing Equipment
-
Device Diagnostic Tool
-
Transducer & Data loggerStrain Gauge
- General Use
- Waterproof
- High Temperature Use
- High and low temperature
- Cryogenic temperature use
- Weldable
- Concrete Material Use
- High Endurance
- For Plastic
- Wood, Gypsum Use
- For Magnetic Field
- Post-yield
- bending and tensile
- Stress Gauge
- Temperature
- Crack Detection
- Bolt Strain
- Sensor specific
- Strain Gage Related Products
- Load Cell
- Displacement
- Pressure
- Velocity/ Acceleration
- Stress
- Torque
- Temperature
- Tilt
- Water Content
- Pore Water Pressure
- Inertial Measurement Unit
- Static Strain Gauge Data Logger
- Dynamic Strain Transducer Data Logger
- Static Strainmeter
- Dynamic Strainmeter
- Portable Strainmeter
- Slope Movement Monitoring
- Strain Indicator
- Strain Gauge Calibration
- Frictional Type Torque Sensor
- Slip-ring type Wheel Torque Measurement
- Slip-ring type Wheel Force Transducer
- Vehicle Examination Transducer
-
Education
-
Digital Platform
-
Industrial Testing
-
Environmental Testing
-
- Solution
- Service
- News
- About
- 中文
